Home Features Pricing Guides FAQ Contact
App Store Google Play

Project guides, step by step

Real procedures written by people who've done the work. Open any guide inside Trackara and check off steps as you go.

Find your next project

Beginner brake jobs to full engine rebuilds. Each guide opens directly in the app.

IH 345ci V8 Engine Rebuild
Full teardown and rebuild of the International Harvester 345, from pulling the engine to first fire-up.
Advanced 18 steps ~40 hours iOS & Android
GM LS Engine Swap Guide
LS swap into a muscle car or truck. Mounts, harness routing, and the ECU tuning basics that trip people up.
Advanced 14 steps ~30 hours iOS & Android
Full Brake System Refresh
Front and rear pads, rotors, calipers, and a fluid flush. Works on most cars with the same set of hand tools.
Beginner 8 steps ~4 hours iOS & Android
Jeep TJ 3-inch Lift Kit Installation
Control arms, new shocks, what alignment specs to ask for, and how to break the bushings in without killing them.
Intermediate 10 steps ~8 hours iOS & Android
Carburetor Rebuild & Tuning
Tear it down, clean every passage, swap the jets and gaskets, then dial it in idle to wide-open.
Intermediate 12 steps ~6 hours iOS & Android
Classic Car Electrical System Overhaul
Pre-1980 wiring jobs: full harness swap, modern fuse panel, decent grounds, and how to add accessories without melting anything.
Advanced 16 steps ~20 hours iOS & Android
Transmission Fluid & Filter Service
Drop the pan, swap the filter, get the right fluid in the right amount. The "lifetime fluid" myth, debunked.
Beginner 6 steps ~2 hours iOS & Android
Performance Exhaust System Install
Headers back. Hangers, gaskets, heat shields, and what to do when the new tips don't quite line up.
Intermediate 8 steps ~5 hours iOS & Android
Timing Belt / Chain Replacement
New belt or chain, fresh tensioner and idlers, water pump if it's behind there. Timing marks aligned twice before you button it up.
Advanced 14 steps ~10 hours iOS & Android

DIY How-To Articles

Step-by-step walkthroughs for common DIY jobs. Each one is free to read, takes 30–60 minutes to do, and saves $80–$200 vs the shop.

Run the guide in the app

Open any guide in Trackara. Check off steps, log parts and costs as you spend, and keep the whole job on file when you're done.

Related in Trackara